User guide

SYSTEM CONTROL WINDOWS
XEROX DOCUPRINT 180 LPS PC UI REFERENCE 8-17
Save...
Save...: Select the Save header button from the auxiliary menu to
save the current console log. The Console Log Save window is
displayed.
Figure 8-16. System Control>Console Log>Save window
Note: The note at the bottom of the window ("Insert Floppy before
selecting ’Apply/Close’ ") will only appear if the Floppy button above
it has been selected.
Save Console Log as: Confirm the file name in this field, or cancel
the print request. If the PC UI cannot save the whole console log due
to insufficient space, an error message displays and no entry is
saved.
If the file name given is already being used, a confirmation window
prompts you to confirm overwriting the existing log with a new log of
the same file name. Refer to the next figure.
Save to: You can save the console log to either the hard disk
(system disk) or a floppy disk. If saving to floppy disk, use a pre-
formatted 3.5-inch 1.44 MB double-sided, high-density disk.
Empty
Empty: Select the Empty header button to empty the entire console
log. The following window appears asking you to confirm your
request.
Figure 8-17. System Control>Console Log>Empty Console Log
Confirmation window
Yes: Select Yes to empty the console log.
No: Select No to cancel the Empty request.
Hard Disk
Floppy