User guide

SYSTEM CONTROL WINDOWS
8-12 XEROX DOCUPRINT 180 LPS PC UI REFERENCE
Paramenter Log Debug Information: Select this button for the log to display the
complete log, along with debug messages.
Saved Log: Enter the console log file name you want to display.
You can also select a saved console log file name from the list in the
Saved Console Logs field.
Console log file names can be 1-8 characters. Alpha, numeric, and
punctuation characters permitted by DOS file names are allowed.
Drive names (such as “a:”) are not allowed. The file name extension
is automatically provided.
Saved Console Logs: To display a saved console log, select the
log's file name from this field. Once you select a file name, it appears
in the Saved Log field. You can also enter a file name directly into
the Saved Log field.
Saved console logs are displayed according to their date, with the
newest at the top of the list. The current log is not displayed in this
list.
You can use the scroll bars at the right of the Saved Console Logs
field to display additional log names. This scroll bar describes the
limits of the Console Log display buffer. Selecting the up or down
arrow when the index bar is at the very top or bottom causes more
Console Log data to be read from disk and placed in the buffer for
display.
Read File From: The logs that appear in the Saved Console Logs
field are determined by the Read File From options. The default is
Hard Disk.
Hard Disk
. Selecting this button means that the displayed logs
are saved on the PC UI hard disk.
Floppy. Selecting this button means that the displayed logs are
saved on a floppy disk at the PC UI. Place a floppy disk in the
PC UI floppy drive and select the Floppy button.
Display...: Select this header button or press <ENTER> to specify
console log display options. The Display Console Log window
opens.
Convert: Select this header button from the auxiliary menu to
convert the specified log to other formats, such as ASCII. Refer to
figure 8-19, System Control>Console Log>Convert window.