User guide

PRINT TASKS WINDOWS
XEROX DOCUPRINT 180 LPS PC UI REFERENCE 6-23
do not need to enter another start request for printing to continue. A
message appears when Drain is complete.
Sheets are printed if complete data pages are in the print file or in
memory. Partially completed pages are not printed.
Before draining the print queue, check the status of the job using the
jobs status task. Refer to the “Print Tasks windows” section of this
reference; or refer to the “Status and print tasks” chapter in the
DocuPrint 180 LPS Operator Guide for information on checking jobs
status.
Endjob: Use the Endjob header button to signal the LPS that the
current print job is the last job coming from the host. A message
notifies you when all formatted pages in the output queue have been
printed.
You may want to use Endjob under the following circumstances:
• When switching from online printing to offline printing
• When an online print job doesn’t contain a trailer banner page
to indicate the end of the report
• If the trailer banner page has not been completely sent
• As an option to resolve multi-copy disk saturation
• When a “MOUNT FORM” message appears on an IBM host
terminal.
After Endjob has been performed, another start command can be
entered.