User guide

PRINT TASKS WINDOWS
6-14 XEROX DOCUPRINT 180 LPS PC UI REFERENCE
Feeding/Finishing Configurations
Select the Feeding/Finishing Configurations header option from the
Printer Status window auxiliary menu to configure the document
feeding and finishing devices (DFD). This option is only available if
your system is configured for both feeding and finishing. The
configuration must be changed each time a feeding or finishing
device is installed on the printer and whenever device settings
change.
Figure 6-10. Print Tasks>Printer Status>Feeding/Finishing
Configurations window
Header buttons Show NVM Values. Select this option from the auxiliary menu to
display non-volatile memory (NVM) values and a description of the
NVM values.
Parameters Feeding Device. Select/enter the name of the feeding device.
Finishing Device. Select/enter the name of the finishing device.
Note: The FCG.LIB file contains DFD configurations for the
system. The FCG.LIB file is typically created and edited by the
system analyst or job programmer. Each DFD has a corresponding
profile label which links the DFD parameters and the printing system.
Units
Select the Units header option from the Printer Status window
auxiliary menu. You can then select the units of measure displayed
on the Printer Status window. Units of measure can be either inches
or millimeters.