User guide

PRINT TASKS WINDOWS
6-12 XEROX DOCUPRINT 180 LPS PC UI REFERENCE
Finishing Configuration
Select the Finishing Configuration header option from the Printer
Status window auxiliary menu. Use the Finishing Configuration
window to configure the document finishing device (DFD). This
option is available only if your system is configured with a finishing
device. The configuration must be changed each time a DFD is
installed on the printer and whenever the finishing device settings
change.
Figure 6-8. Print Tasks>Printer Status>Finishing
Configuration window
Parameters Finishing Device. Select/enter the name of the finishing device.
Show NVM Values. Select this option from the auxiliary menu to
display non-volatile memory (NVM) values and a description of the
NVM values.
Note: The FCG.LIB file contains DFD configurations for the
system. The FCG.LIB file is typically created and edited by the
system analyst or job programmer. Each DFD has a corresponding
profile label which links the DFD parameters and the printing system.