User guide

PRINT TASKS WINDOWS
XEROX DOCUPRINT 180 LPS PC UI REFERENCE 6-11
Current clusters:Selecting the Current Clusters option displays all
clusters in the system that have defined trays.
Current Clusters in Tray All
, 1,2,3,4,5,6,7: Selecting a specific
Current Clusters tray displays only clusters set up for that tray. To
display clusters for a third-party feeding device, select 7.
All Clusters: Selecting this option displays all clusters in the system.
Preferred Clusters in Tray 1,2,3,4,5,6,7: Selecting a specific
Preferred Clusters tray displays preferred trays for all clusters using
that tray. To display preferred clusters for a third-party feeding
device, select 7.
Header buttons Show: Select the Show header button to show the preferred and
current trays for the cluster name you have entered in the input field.
Set Preferred: Select the Set Preferred header button to assign
preferred trays to a new or existing cluster.
Set Current: Select the Set Current header button to assign current
trays to a new or existing cluster.
Delete: Selecting the Delete header button deletes the cluster name
highlighted in the display field.
Set: Select this header button to apply preferred trays as the current
trays.
Redisplay: Select this header button to update the cluster display
according to the current selection.
Feed mode: Select this button to override stock selections in a print
job and force printing of a job using a specific tray or cluster. (See
page 6-6 for details.)
Note: The cluster name cannot be changed for a tray that is
currently in use. Tray requirements for the current report are not
known beforehand. The tray is not selectable in the window and is
not changeable. However, when two or more trays contain the same
stock, the backup trays can be selected and the contents changed,
provided one tray remains in use in the cluster.