User guide

PRINT TASKS WINDOWS
6-10 XEROX DOCUPRINT 180 LPS PC UI REFERENCE
Clusters
Use the Clusters window to define new clusters, or to edit preferred
or current trays for existing clusters. The Clusters window displays
all clusters in the system with their preferred and current trays.
Figure 6-7. Print Tasks>Printer Status>Clusters window
The Clusters window is accessed by selecting the Clusters header
button from the Printer Status window or by selecting Cluster... from
the Feed Mode pull down menu of the Printer Status window.
Parameters Cluster Name: Highlight or enter the cluster name in the display field
to specify the name of the cluster you wish to edit, delete, or create.
Auto size: Select the Autosize box if you want to apply the autosize
option to a newly created cluster. Autosize allows you to load
different size paper in different trays. Autosize is the default tray
contents.
Preferred Trays: Select preferred tray selections and apply them to
the current trays by selecting Set. To select a third-party feeding
device as a preferred tray, select 7.
Current Trays: Select Current Trays boxes to assign new trays for
a cluster(s). When you highlight the cluster in the display area, the
cluster name appears in the Cluster Name field. You can then assign
current trays to that cluster. To select a third-party feeding device as
a current tray, select 7.
No Replace
:Select the No Replace button if you want to apply the
No Replace option to the new cluster. No Replace keeps all cluster
definitions for trays, so that a tray can belong to more than one
cluster.
Depending on how your system is set up, you may not have the No
Replace option.