User guide

PRINT TASKS WINDOWS
6-6 XEROX DOCUPRINT 180 LPS PC UI REFERENCE
Status for each stacker bin (Bins A, B, C, and D) includes:
• Output bin state.
— In Use. The bin in which the current report will be
stacked.
— Ready. The bin elevator is up and the bin is ready to
receive output.
— Not Available. The bin cannot be used (for example,
tray jammed or broken).
— Busy. The bin elevator is raising or lowering. The bin
is not ready until the elevator stops moving.
— Lowered. The bin is not ready to feed because the
elevator is down.
• Output bin size.
— None. The bin is empty and containers are not being
used. Any size output can be stacked in the bin.
— X by Y. Indicates the size of paper (or container and
paper) currently in the bin.
• Ouput bin levels (by 20-pound ream height equivalents).
— Empty. No sheets present in the bin.
— n to 4. Approximately 1, 2, 3, or 4 reams in the bin.
— Full. The bin is full according to current bin full criteria
and is ready to be emptied.
• Output bin mode.
Auto. When the first bin is full, the system automatically
switches to the next bin. ’Stacking’ is displayed on the bin
that is currently stacking.
Feed Mode
The Feed Mode window is accessed by selecting the Feed Mode
header button from within the Print Tasks/Printer Status window.
Figure 6-4. Print Tasks>Printer Status>Feed Mode window
Use the Feed Mode window to override stock selections in a print job
and force printing of a job using a specific tray or cluster.