Use and Care Manual

Quick Start

Home Checkup Test

Putting Bob in Checkup Mode

While in checkup mode, the word “bObsweep” will ash on Bob’s screen.

1. Flip Bob’s power switch OFF. 2. While holding down the CHECKUP button on

Bob’s cover, ip Bob’s power switch ON.

If Bob fails any part of the checkup test, he may need a replacement part. In this case,

please contact our helpful support team at support@bobsweep.com or 1-888-549-8847.

Our business hours are Monday – Friday, 9 a.m. – 5 p.m. Pacic Time.

Bob will chirp 3 times to let you know he is now in checkup mode. You may release the

CHECKUP button. Do not press any additional buttons.