Use and Care Manual

Quick Start
Parts and Accessories
Edge Sensors
Edge Sensors
If Bob repeatedly backs up or displays TROUBLE NR. 04 while cleaning dark carpet, then
you’ll need to deactivate the edge sensors. Make sure Bob is turned ON before proceeding.
Deactivating Bob’s Edge Sensors
Reactivating Bob’s Edge Sensors
When the edge sensors
are deactivated, Bob will
be unable to detect stairs
or sharp drops. Keep
Bob away from these
obstacles.
Quick Tip:
1. Hold down the UV button on Bob’s cover. The
5 bars at the top of his screen will start to ash.
2. Release the button when the bars stop ashing
and remain lit.
The 5 bars at the top of Bob’s screen will remain
lit when his edge sensors are deactivated.
UV
DIRT
TROUBLE NR.
CAPACITY
AUTO SPOT WALL FOLLOW DOCK
MIN. CLEANING
CHARGING
READY
UV
DIRT
TROUBLE NR.
CAPACITY
AUTO SPOT WALL FOLLOW DOCK
MIN. CLEANING
CHARGING
READY
1. Hold down the UV button on Bob’s cover. The
5 bars at the top of his screen will start to ash.
2. Release the button when the bars stop ashing
and are no longer lit.
6867