User Manual

74
Step 1: Edge and Wheel Sensors
The checkup mode indicator should read 0000. Numbers 1 – 4 at the top of
the remote represent bObi’s 4 edge sensors, and the numbers 5 and 6
represent the 2 ground sensors inside bObi’s left and right wheels.
Remove bObi’s side brush before testing her edge sensors.
With bObi on the floor, numbers 1 – 4
should be underlined to show that bObi’s
edge sensors are working.
Lift bObi about 6 inches (15 cm) off the
ground. The 4 lines under numbers 1 –
4 should disappear, and numbers 5 and
6 should be underlined.
1 2