Owner Manual

NoSweep™ Stripes
1. Remove the mop attachment. 2. Pull open the tab and empty the
reservoir.
4. Wash the mopping cloth. Air-dry all parts
when done.
3. Tap any debris that may have collected
inside the attachment.
Wet Mop Attachment Maintenace
Accessories*
Bob’s NoSweep™ stripes allow you to create boundaries Bob will not cross. Place the
NoSweep™ stripes on the ground to mark the areas you would like Bob to avoid.
*Sold separately. Included in accessories bundle.
Important Note: The reservoir should be drained after use to avoid possible water damage.
16