Use and Care Manual

16 17

Before Bob’s first clean, you must install his side brush, which allows him to sweep

along corners, walls, and other hard-to-reach places.

To do this, you will need the following materials, all of which are included inside Bob’s

box: a side brush, a flat head screwdriver, and a short screw.

Flip Bob over onto a flat

surface. Place the side

brush over the empty

socket on Bob’s under-

side.

Plug the charging adapter into the side

of the charging station. The station’s

red power light will turn on.

You may use the additional

side brush and screw as

spares.

Place Bob on his charging station with

the metal plates on his underbelly sit-

ting on top of the nodes on his station.

Secure Bob’s side brush

onto the socket using the

flat head screwdriver and

short screw.

Install Bob’s Side Brush

After installing Bob’s side brush, you must now set him to charge.

Charge Bob