Use and Care Manual

cleaning mode
deep
clean
quick
clean (30M)
touch
up (15M)
waffle
track
spiral
track
wall
track
check up
charging
Oops! I feel there’s something funny
going on with my:
Edge Sensors
Touch Sensors
Left Wheel
Main Brush
Obstacle Sensors
Dustbin
Right Wheel
Power System
cleaning
cleaning mode
deep
clean
quick
clean (30M)
touch
up (15M)
waffle
track
spiral
track
wall
track
78 79
Step Five: blOck Plus
™
blOck Plus
™
must be synced and turned ON for this step of the checkup test. Unplug
the charging station so its signal does not interfere with this test.
Place blOck Plus
™
with its digital beam directly facing Bob’s front. blOck Plus emits a
digital boundary from both its front and left sides. Test both boundaries to ensure that
they are working properly. The word “Deep Clean” should light up when it senses a
signal from either side of blOck Plus.
If Bob responds to blOck Plus’s signals, you may move on to the next step of the test.
Step Six: Display Screen
Press the GO! button on Bob’s cover once more. Each icon on Bob’s screen will light
up in a repeating rotation.
Once the cycle has finished, you may move on to the next step of the checkup test.