Use and Care Manual

56 57
It is recommended that you remove and clean Bob’s main brush on a weekly basis.
To do so:
To reinstall the brush:
Main Brush
Remove the screw se-
curing Bob’s main brush
using a flat head screw-
driver.
You may use a pair of
scissors to cut away any
hair or threads wrapped
around the brush, or a
pair of tweezers to re-
move congestion from the
notches where the main
brush is held.
Use the cleaning tool to
remove hair and debris
from both ends of the
brush as well as the com-
partment inside Bob.
1 2 3
Replace the end piece and insert the
opposite end of the brush into the square
indentation inside Bob.
Lastly, re-tighten the screw.
1 2