Use and Care Manual

50 51
To turn blOck Plus
™
OFF:To set up digital barriers with blOck Plus
™
:
To activate the left barrier:
Press the power button on the far left.
The red power light on the left side of
blOck Plus
™
will turn on.
To turn the left barrier off:
Press the power button on the far left.
The red power light on the left side of
blOck Plus
™
will disappear.
To activate the front barrier:
Press the power button in the center.
The red power light on the front side of
blOck Plus
™
will turn on.
To turn the front barrier off:
Press the power button in the center.
The red power light on the front side of
blOCk Plus
™
will disappear.
When running low on battery, the blOck’s red power lights will begin to blink rapidly.
To conserve battery, turn the blOck OFF when it is not in use.
blOck Plus
™
will remain
ON for three hours before
entering standby mode.