Use and Care Manual

• Position the charging station against a wall on a hard, flat surface.

• Make sure there is at least 10 feet (3 meters) of open space to the front and 2 feet

(0.5 meters) to the sides.

Charging Station Placement

Bob is smart and will automatically search for his charging station when his battery

reaches 15%. But first, you must sync the two to establish communication.

To sync the charging station:

You can also direct Bob to his charging station at any time by pressing the CHARGE

button on his cover or on his FullCommand

™

remote.

Auto Charging

Plug the charging adapter

into the charging station.

The station’s red power

light will turn on.

Bob will chirp twice to let

you know the sync was

successful.

Hold down the SYNC

button on the back of the

charging station while at

the same time flipping

Bob’s power switch ON.

1 2 3

2 ft (0.5m)

10 ft (3m)