Specification Sheet
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 4/27/11
R/B, S/H
Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2011 by Bobrick Washroom Equipment, Inc.
Technical Data
4''
100mm
3''
75mm
2-1/8''
55mm
1''
25mm
Maximum
Mounting
Thickness
2-1/16''
50mm
Dia.
8-1/4''
210mm
Lavatory or
Countertop
6-1/8''
155mm
3-1/4''
85mm
Dia.
MATERIALS:
Piston, Spout, and Top Cover — Type-304 stainless steel with bright polished fi nish.
Cover Spacer — Rigid, impact-resistant polyester.
Escutcheon — Chrome-plated, high-impact-resistant ABS with bright polished fi nish. Concealed locking mechanism.
Body and Shank — High-impact-resistant plastic.
Valve — ABS cylinder. Stainless steel spring. U-packing seal and duckbills.
Container — Translucent, shatter-resistant polyethylene. Capacity: 20-fl oz (0.6-L).
OPERATION:
Press piston down to dispense commercially marketed all purpose hand soaps. Vandal-resistant spout can rotate 360° without damage
to unit. Escutcheon locks to body with concealed locking mechanism that is opened with special key provided. To fi ll from top, unlock
cover and remove piston, spout, and supply-tube assembly. Unit may also be fi lled by removing container from below lavatory.
Designer's Note: Bobrick liquid soap dispensers are designed to dispense commercially marketed all purpose hand soaps including
liquid and lotion soaps, synthetic detergents, and antibacterial soaps containing PCMX and/or Triclosan.
INSTALLATION:
Unit is designed for installation in 1" (25mm) diameter hole in porcelain-enameled steel, cast-iron or vitreous-china lavatories, as well as
in countertops adjacent to lavatories. Unit may be mounted in unused faucet hole or through special hole requisitioned when lavatory
is ordered from manufacturer (specify punching location). Shank accommodates maximum 1" (25mm) mounting thickness and can be
cut in the fi eld. Clearance required for container diameter is 3-5/16" (85mm).
SPECIFICATION:
Lavatory-mounted soap dispenser shall dispense commercially marketed all purpose hand soaps. Piston and spout assembly shall be
type-304 stainless steel with bright polished fi nish. Escutcheon shall lock to body with concealed locking mechanism that is opened
only with special key provided. Spout shall rotate 360° without damage to valve mechanism. Piston, spout, and supply-tube assembly
shall be removable from top for fi lling and maintenance. Valve shall be equipped with plastic cylinder, stainless steel spring, U-packing
seal, and duckbills. Shank shall accommodate mounting thicknesses up to 1" (25mm). Translucent, shatter-resistant polyethylene
container shall have a capacity of 20-fl oz (0.6-L).
Lavatory-Mounted Soap Dispenser shall be Model B-8221 of Bobrick Washroom Equipment, Inc., Clifton Park, New York;
Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick
Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.
B-8221
LAVATORY-MOUNTED
SOAP DISPENSER