Specification Sheet

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/9/14 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2014 by Bobrick Washroom Equipment, Inc.
Technical Data
BOBRICK
16-1/8"
410mm
Recommended Mounting Height Off Floor
45" to 59" (1145mm to 1500mm)
Recommended Mounting Height Off Floor
For Accessible Design
30" to 45" (760mm to 1145mm)
11-1/2"
290mm
3-1/16"
80mm
Ty p.
S
2-7/16"
60mm
Finish Face
of Wall
3-1/2"
90mm
Ty p.
S
MATERIALS:
Durable, high-impact grey ABS with high-gloss finish on exposed surfaces. Front of dispenser has same degree of arc as other
Bobrick MatrixSeries washroom accessories. Radius on corners, edges and top complement other MatrixSeries accessories.
OPERATION:
Dispenser holds single- or half-fold paper toilet seat covers. Dispenser fills from bottom through concealed opening. Capacity:
500 toilet seat covers.
INSTALLATION:
Mount unit on wall or partition of toilet compartment with two #8 x 1½'' (4.2 x 38mm) flat-head sheet-metal screws (not
furnished) at points indicated by an S. For plaster or dry wall construction, provide concealed backing to comply with local
building codes, then secure unit with sheet-metal screws. For other wall surfaces, provide fiber plugs or expansion shields for
use with sheet-metal screws, or provide 1/8'' (3mm) toggle bolts or expansion bolts.
Note: Provide a 5'' (125mm) minimum clearance from bottom of dispenser to top of any horizontal projection to provide room
for filling dispenser from bottom.
SPECIFICATION:
Surface-mounted toilet-seat-cover dispenser shall be durable, high-impact grey ABS with high-gloss finish on exposed surfaces.
Front of dispenser shall have same degree of arc as other Bobrick MatrixSeries accessories in the washroom. Radius on
corners, edges and top of dispenser shall complement other Bobrick MatrixSeries washroom accessories. Unit shall have a
rectangular opening for dispensing toilet seat covers and a concealed opening in bottom for filling. Capacity shall be 500 paper
toilet seat covers.
Surface-Mounted Toilet-Seat-Cover Dispenser shall be Model B-5221 of Bobrick Washroom Equipment, Inc.,
Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment
Limited, United Kingdom.
B-5221
MatrixSeries
®
SURFACE-MOUNTED
SEAT-COVER DISPENSER