Specification Sheet

continued . . .
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 80111 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2011 by Bobrick Washroom Equipment, Inc.
Technical Data
17-7/16''
445mm
5-7/16''
140mm
Typ.
S
1/4''
6mm
Typ.
56-1/4''
1430mm
15-5/16''
390mm
Recessed Cabinet
3-1/16''
80mm
Typ.
26''
660mm
19''
485mm
5''
125mm
1/8''
3mm
2-15/16''
75mm
Typ.
54-1/8''
1375mm
Recommended Mounting Height Off Floor
66'' to 73'' 1675 to 1855mm
Recommended Mounting Height Off Floor
For Accessible Design
60-1/4'' 1530mm
1-3/4''
45mm
3''
75mm
Typ.
3-15/16''
100mm
Finish Face of Wall
Stainless
Steel Door
Flush
Lock & Key
PaperTowel
Dispenser
Removable
Front Panel
S
S
S
Removable
LinerMate Trash
Liner Holder
S
S
TowelMate
Towel Rod
TowelMate
Towel Guide
Bracket Return
Rough Wall Opening
16" (405mm) wide
54-3/4" (1390mm) high
4" (100mm) minimum
recessed depth
MATERIALS:
Cabinet — 18-8, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have satin-finish.
Flange — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Drawn, one-piece, seamless construction. Radius
on corners and return edges complement corners and edges of door and waste receptacle.
Door — 18-8, type-304, 18-gauge (1.2mm) stainless steel with satin-finish. Drawn, one-piece, seamless construction. Front of
door has same degree of arc as front of waste receptacle and other Bobrick ConturaSeries washroom accessories. Radius on
corners and edges of door match side edges of waste receptacle and other ConturaSeries accessories. Secured to cabinet with
a full-length stainless steel piano-hinge. Equipped with a stainless steel cable door-swing limiter and flush tumbler lock keyed
like other Bobrick washroom accessories.
Paper Towel Dispenser — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Cabinet inside equipped with
90° return towel guide angle to prevent paper towels from falling forward out when door is opened for servicing. Rounded
towel tray has hemmed opening to dispense paper towels without tearing. Unit equipped with TowelMate consisting of a 90°
return towel guide angle inside cabinet to prevent paper towels from falling forward out when door is opened for servicing and
a Nylon Rod across the center of the towel tray to dispense paper towels one at a time. Waste receptacle shall have a formed,
18-gauge (1.2mm), one-piece, seamless, removable front panel with top edge hemmed. Capacity: 600 C-fold or 800 multifold
paper towels.
TowelMate
®
Towel Rod Assembly — Consisting of a round Nylon Rod and (2) stainless steel Rod Screws for attachment, is
field replaceable. Stainless steel Stop Screws (2) lock TowelMate Towel Rod assembly in place.
To retrofit TowelMate into existing installed units manufactured prior to April 2010, order TowelMate Accessory Bobrick Part
No. 3944-130
ConturaSeries
®
RECESSED PAPER TOWEL
DISPENSER AND WASTE
RECEPTACLE
B-43944