Specification Sheet

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 6/30/15 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2015 by Bobrick Washroom Equipment, Inc.
Technical Data
1-3/8''
25mm
Typ.
S
S
6-1/16''
155mm
12-1/2''
320mm
7-9/16''
190mm
S
S
Lock & Key
Stainless
Steel Door
Toilet Tissue
Spindles (2)
Stainless
Steel
Flange
S
2-15/16''
75mm
1-3/4''
44mm
Typ.
Finish Face of Wall
6''
150mm
Pivot Point
S
2-3/16''
55mm
Typ.
3''
76mm
1''
25mm
1/8''
3mm
11-1/16''
280mm
Recommended Mounting Height Off Floor
28'' to 36'' 710 to 915mm
Recommended Mounting Height Off Floor
For Accessible Design
28'' 710mm
MATERIALS:
Cabinet — 18-8, type-304, 22-gauge (0.8mm) stainless steel. Welded construction. Exposed surfaces have satin finish.
Flange — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn, one-piece, seamless construction. Radius on corners and
return edges complement corners and edges of door.
Door — 18-8, type-304, 22-gauge (0.8mm) stainless steel with 18-gauge (1.2mm) stainless steel door frame. Exposed surfaces have satin finish.
Front of door is drawn, one-piece, seamless construction and has same degree of arc as other Bobrick ConturaSeries washroom accessories.
Radius on corners and edges of door complement other ConturaSeries accessories. Secured to cabinet with two rivets. Equipped with a flush
tumbler lock keyed like other Bobrick washroom accessories.
Dispensing Mechanism, Inner Housing, and Cam — 18-8, type-304, 18-gauge (1.2mm) stainless steel.
Spindles (2) — Heavy-duty, one-piece, molded ABS. Theft-resistant, spindles retained in dispensing mechanism when door is locked.
OPERATION:
Unit holds two standard-core toilet tissue rolls up to 5-1/4" (133mm) diameter (1800 sheets). Tissue rolls are loaded and locked into dispensing
mechanism. Extra roll automatically drops in place when bottom roll is depleted. Depleted rolls can only be removed after unlocking door.
INSTALLATION:
Provide framed rough wall opening 6-1/4" wide x 11-1/4" high (160 x 290mm). Minimum recessed depth required to finish face of wall is 3-1/8"
(80mm). Allow clearance for construction features that may protrude into opening from opposite wall. Coordinate with mechanical engineer to
avoid pipes, vents, and conduits. Mount unit in wall opening with shims between framing and cabinet at all points indicated by an S, then secure
unit with four #10 x 5/8" (4.8 x 16mm) sheet-metal screws (not furnished).
SPECIFICATION:
Recessed multi-roll toilet tissue dispenser shall be type-304 stainless steel with welded construction, including dispensing mechanism, inner
housing and cam; exposed surfaces shall have satin finish. Front of toilet tissue dispenser door shall be drawn, one-piece, seamless
construction and shall have same degree of arc and match other Bobrick ConturaSeries accessories in the washroom. Radius on corners and
edges of flange and door shall complement other Bobrick ConturaSeries washroom accessories. Door shall be secured to cabinet with two
rivets and equipped with a flush tumbler lock keyed like other Bobrick washroom accessories. Flange shall be drawn, one-piece, seamless
construction. Unit shall dispense two standard-core toilet tissue rolls up to 5-1/4" (133mm) diameter (1800 sheets). Extra roll shall
automatically drop in place when bottom roll is depleted. Unit shall be equipped with two heavy-duty, one-piece, molded ABS spindles.
Theft-resistant, spindles retained in dispensing mechanism when door is locked.
Recessed Multi-Roll Toilet Tissue Dispenser shall be Model B-4388 of Bobrick Washroom Equipment, Inc., Clifton Park, New
York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick
Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.
ConturaSeries
®
RECESSED MULTI-ROLL
TOILET TISSUE DISPENSER
B-4388
Rough Wall Opening
6-1/4" (160mm) wide
11-1/4" (290mm) high
3-1/8" (80mm) minimum
recessed depth