Manualshelf

Specification Sheet

ManualsBrandsBobrick ManualsCombo UnitsBobrick ConturaSeries Wall Mounted Paper Towel Dispenser with Waste Receptacle
12
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 6/30/15 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2015 by Bobrick Washroom Equipment, Inc.
continued . . .
Technical Data
3-5/16''
85mm
Typ.
S
Finish Face of Wall
5-7/16''
140mm
4''
100mm
10-1/2''
265mm
10-1/2''
265mm
S S
28-1/8''
715mm
S
S
2-3/4''
70mm
Typ.
12-7/8''
325mm
1/4''
6mm
Typ.
Lock & Key
Stainless
Steel Door
Paper Towel
Dispenser
Removable
Front Panel
S
2-3/16''
55mm
Typ.
6-5/8"
170mm
Stainless
Steel Skirt
Removable
LinerMate
Trash Liner
Holder
TowelMate
Towel Rod
TowelMate
Towel Guide
Bracket Return
Recommended Mounting Height Off Floor
For Accessible Design
52-3/4'' 1340mm
Recommended Mounting Height Off Floor
71'' 1805mm
MATERIALS:
Cabinet — 18-8, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have satin-finish.
Skirt — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Radius on corners complement corners and edges of
flange, door, and waste receptacle.
Flange — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Drawn, one-piece, seamless construction. Radius
on corners and return edges complement corners and edges of door, skirt, and waste receptacle.
Door — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Drawn, one-piece, seamless construction. Front of
door has same degree of arc as front of waste receptacle and other Bobrick ConturaSeries washroom accessories. Radius on
corners and edges of door match side edges of waste receptacle and other ConturaSeries accessories. Secured to cabinet with
a full-length stainless steel piano-hinge. Equipped with a flush tumbler lock keyed like other Bobrick washroom accessories.
Paper Towel Dispenser — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Cabinet inside equipped with
90° return towel guide angle to prevent paper towels from falling forward out when door is opened for servicing. Rounded
towel tray has hemmed opening to dispense paper towels without tearing. Unit equipped with TowelMate consisting of a 90°
return towel guide angle inside cabinet to prevent paper towels from falling forward out when door is opened for servicing and
a Nylon Rod across the center of the towel tray to dispense paper towels one at a time. Waste receptacle shall have a formed,
one-piece, seamless, removable front panel with top edge hemmed. Capacity: 350 C-fold or 475 multifold paper towels.
TowelMate
®
Towel Rod Assembly — Consisting of a round Nylon Rod and (2) stainless steel Rod Screws for attachment, is
field replaceable. Stainless steel Stop Screws (2) lock TowelMate Towel Rod assembly in place.
To retrofit TowelMate into existing installed units manufactured prior to April 2010, order TowelMate Accessory Bobrick Part
No. 369-130.
ConturaSeries
®
SURFACE-MOUNTED
PAPER TOWEL DISPENSER
AND WASTE RECEPTACLE
B-43699

Summary of content (2 pages)