Specification Sheet

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. B-4369 r05/18/16 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2016 by Bobrick Washroom Equipment, Inc.
Waste Receptacle — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Formed, one-piece, seamless
construction. Removable front panel has same degree of arc as front of door and other Bobrick ConturaSeries washroom
accessories. Top edge hemmed for safe handling. Radius on side edges of waste receptacle match corners and edges of paper
towel dispenser door and other ConturaSeries accessories. Secured to cabinet with two keyholes over studs on bottom and two
tamper-resistant setscrews on top. Capacity: 3.0-gal. (11.3-L).
LinerMate
®
Trash Liner Holder — Unit equipped with LinerMate trash liner holder fabricated with molded plastic trash
liner holder sleeve and a 20-gauge (0.91mm) stainless steel, U-shaped support strap; riveted construction. Trash liner holder
shall have an arc at front and same shape as inside of waste receptacle area. LinerMate facilitates installation and removal of
disposable trash liners and retains liner inside waste receptacle
To retrofit LinerMate into existing installed units manufactured prior to December 2009, order LinerMate Accessory Bobrick
Part No. 4369-134.
OPERATION:
Paper towel dispenser will dispense C-fold or multifold paper towels without adjustment or use of adapters. Cable door-swing
limiter prevents damage to washroom accessories and walls. Load paper in towel tray, and then pull one sheet of paper towel
over the TowelMate towel rod and out to conceal rod and start dispense. To insert disposable trash liner, lift LinerMate bag
holder up and forward and rest over edge of waste receptacle front panel with the bottom notches of LinerMate engaged on top
front edge of receptacle. Place disposable trash liner inside LinerMate and fold disposable trash liner over LinerMate sleeve.
Tie a knot in the corner of the disposable trash liner, then place LinerMate with disposable trash liner back into receptacle. To
empty, gather disposable trash liner from LinerMate trash liner holder sleeve and lift bag up. Front of waste receptacle panel is
removable for cleaning cabinet interior.
INSTALLATION:
Provide framed rough wall opening 11-3/8" wide x 26-5/8" high (290 x 675mm). Minimum recessed depth required to finish
face of wall is 4" (102mm). Allow clearance for construction features that may protrude into rough wall opening from opposite
wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide
aluminum channel or other filler to eliminate gap between flange and finish face of wall. Mount unit in wall opening with
shims between framing and cabinet at all points indicated by an S, then secure unit with #8 x 1-1/4" (4.2 x 32mm) screws (not
furnished).
SPECIFICATION:
Recessed paper towel dispenser and waste receptacle shall be type-304 stainless steel with all-welded construction; exposed
surfaces shall have satin-finish. Front of paper towel dispenser door and waste receptacle shall have same degree of arc and
match other Bobrick ConturaSeries accessories in the washroom. Radius on corners and edges of flange, door, and waste
receptacle shall complement other Bobrick ConturaSeries washroom accessories. Flange shall be drawn, one-piece, seamless
construction. Paper towel dispenser door shall be drawn, one-piece, seamless construction; secured to cabinet with a full
length stainless steel piano-hinge; and equipped with a flush tumbler lock keyed like other Bobrick washroom accessories.
Paper towel dispenser shall dispense 350 C-fold or 475 multifold paper towels. Unit equipped with TowelMate consisting of a
90° return towel guide angle inside cabinet to prevent paper towels from falling forward out when door is opened for servicing
and a Nylon Rod across the center of the towel tray to dispense paper towels one at a time. Waste receptacle shall have a
formed, one-piece, seamless, removable front panel with top edge hemmed. Unit equipped with LinerMate trash liner holder
fabricated with molded plastic trash liner holder sleeve and a 20-gauge (0.91mm) stainless steel, U-shaped support strap;
riveted construction. Trash liner holder shall have an arc at front and same shape as inside of waste receptacle area. LinerMate
facilitates installation and removal of disposable trash liners and retains liner inside waste receptacle. Capacity of waste
receptacle shall be 3.0-gal. (11.3-L).
Recessed Paper Towel Dispenser And Waste Receptacle shall be Model B-4369 of Bobrick Washroom Equipment,
Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment
Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom
Equipment Limited, United Kingdom.