Specification Sheet

continued . . .
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 05/18/16 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2016 by Bobrick Washroom Equipment, Inc.
Technical Data
ConturaSeries
®
RECESSED
PAPER TOWEL DISPENSER
AND WASTE RECEPTACLE
B-4369
S
2-15/16''
75mm
Ty p.
2-1/2"
65mm
1/8''
3mm
26-5/8''
665mm
14-1/2''
370mm
Ty p.
2-1/16''
50mm
Ty p.
Recommended Mounting Height Off Floor
70'' 1780mm
Recommended Mounting Height Off Floor
For Accessible Design
51-3/4'' 1315mm
S
S
S
Finish Face of Wall
3-15/16''
100mm
1-7/16''
35mm
10-1/2''
265mm
10-1/2''
265mm
S
S
10-7/8''
275mm
Recessed Cabinet
S
S
S S
28''
710mm
S
S
2-15/16''
75mm
Ty p.
12-3/4''
325mm
1/4''
6mm
Lock & Key
Stainless
Steel Door
Paper Towel
Dispenser
Removable
LinerMate
Trash Liner
Holder
TowelMate
Towel Rod
TowelMate
Towel Guide
Bracket Return
Rough Wall Opening
11-3/8" (290mm) wide
26-5/8" (675mm) high
4" (100mm) minimum
recessed depth
MATERIALS:
Cabinet — 18-8, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have satin-finish.
Flange — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Drawn, one-piece, seamless construction. Radius
on corners and return edges complement corners and edges of door and waste receptacle.
Door — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Drawn, one-piece, seamless construction. Front of
door has same degree of arc as front of waste receptacle and other Bobrick ConturaSeries washroom accessories. Radius on
corners and edges of door match side edges of waste receptacle and other ConturaSeries accessories. Secured to cabinet with a
full-length stainless steel piano-hinge. Equipped with a flush tumbler lock keyed like other Bobrick washroom accessories.
Paper Towel Dispenser — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Cabinet inside equipped with
90° return towel guide angle to prevent paper towels from falling forward out when door is opened for servicing. Rounded
towel tray has hemmed opening to dispense paper towels without tearing. Unit equipped with TowelMate consisting of a 90°
return towel guide angle inside cabinet to prevent paper towels from falling forward out when door is opened for servicing and
a Nylon Rod across the center of the towel tray to dispense paper towels one at a time. Waste receptacle shall have a formed,
one-piece, seamless, removable front panel with top edge hemmed. Capacity: 350 C-fold or 475 multifold paper towels.
TowelMate
®
Towel Rod Assembly — Consisting of a round Nylon Rod and (2) stainless steel Rod Screws for attachment, is
field replaceable. Stainless steel Stop Screws (2) lock TowelMate Towel Rod assembly in place.
To retrofit TowelMate into existing installed units manufactured prior to April 2010 order TowelMate Accessory Bobrick Part
No. 369-130.