Specification Sheet
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. B-43644 Rev. 10/9/14 Printed in Canada
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2014 by Bobrick Washroom Equipment, Inc.
INSTALLATION:
Provide framed rough wall opening 15-7/8" wide x 26-1/4" high (405 x 665mm). Minimum recessed depth required to finish
face of wall is 4" (100mm). Allow clearance for construction features that may protrude into rough wall opening from opposite
wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide
aluminum channel or other filler to eliminate gap between flange and finish face of wall. Mount unit in wall opening with
shims between framing and cabinet at all points indicated by an S, then secure unit with #8 x 1-1/4" (4.2 x 32mm) screws (not
furnished).
SPECIFICATION:
Recessed waste receptacle shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have satin
finish. Front of waste receptacle shall have same degree of arc and match other Bobrick ConturaSeries accessories in the
washroom. Radius on corners and edges of flange and waste receptacle shall complement other Bobrick ConturaSeries
washroom accessories. Flange shall be drawn, one-piece, seamless construction. Waste receptacle shall have a formed,
one-piece, seamless, removable front panel with top edge hemmed. Waste receptacle shall be equipped with LinerMate to
facilitate installation and removal of disposable trash liners and retains liner inside waste receptacle. LinerMate trash liner
holder is fabricated with a molded plastic bag holder sleeve and a 20-gauge (0.91mm) stainless steel, U-shaped support strap;
riveted construction. Bag holder shall have an arc at front and same shape as inside of waste receptacle area. Capacity of waste
receptacle shall be 12.8-gal. (48.3-L).
Recessed Waste Receptacle shall be Model B-43644 of Bobrick Washroom Equipment, Inc., Clifton Park, New
York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough,
Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United
Kingdom.