Specification Sheet

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. B-3942 r10/11/16 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2016 by Bobrick Washroom Equipment, Inc.
OPERATION:
Paper towel dispenser accommodates C-fold or multifold paper towels without adjustment or use of adapters. To adapt to
changing needs of washrooms, this unit is field convertible with the Universal, Touch-Free Roll Towel Dispenser or Universal,
Automatic Roll Towel Dispenser. To order convertible modules, reference part numbers below under Options.
To empty waste receptacle, unlock with key provided.
NOTE: To accommodate disposable trash liners, order LinerMate
®
, sold as an optional accessory item. LinerMate eliminates
unsightly trash liner overhang and facilitates installation and removal of disposable trash liners in the 12-gallon waste
receptacle.
TowelMate
®
available as an optional accessory allows paper towels to dispense one at time without bulging or sagging, or
falling through the towel tray opening. The 90 degree return on the towel guide prevents papers from falling forward and out
when door is opened for servicing. TowelMate fits Gamco and most other manufacturers' similar models.
Options:
• Universal Touch-Free Roll Towel Dispenser Module convertible in field: order Bobrick Part No. 3961-50.
• Automatic, Universal Roll Towel Dispenser Module convertible in field: order Bobrick Part No. 3974-150.
• 18-gallon Waste Receptacle: order Bobrick Part No. 368-60.
• Reusable Vinyl Liner: order Bobrick Part No. 368-16.
• LinerMate for 12-gal waste only: order Bobrick Part No. 3944-134.
• TowelMate accessory: order Bobrick Part No. 3944-130.
INSTALLATION:
Provide framed rough wall opening 16" wide x 54-3/4" high (406 x 1390mm). Minimum recessed depth required to finish
face of wall is 2" (51mm). Allow clearance for construction features that may protrude into rough wall opening from opposite
wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide
aluminum channel or other filler to eliminate gap between skirt and finish face of wall. Mount unit in wall opening with shims
between framing and cabinet at all points indicated by an S, then secure unit with #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws
(not furnished).
SPECIFICATION:
Semi-recessed convertible paper towel dispenser and waste receptacle shall be Type-304 stainless steel with welded
construction; exposed surfaces shall have satin finish. Flange shall be drawn and beveled, one-piece, seamless construction.
Door shall be secured to cabinet with a full-length stainless steel piano-hinge and equipped with a semi-concealed tumbler lock
keyed like other Bobrick washroom accessories. Paper towel dispenser shall dispense 600 C-fold or 800 multifold paper towels.
Removable waste receptacle shall be secured to cabinet with a tumbler lock, have front and side edges of bottom and all top
edges hemmed for safe handling, and shall have a minimum capacity of 12-gal. (45.5-L).
Semi-Recessed Convertible Paper Towel Dispenser And Waste Receptacle shall be Model B-3942 of Bobrick
Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick
Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and
Bobrick Washroom Equipment Limited, United Kingdom.