Specification Sheet
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev 10/21/14 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2014 by Bobrick Washroom Equipment, Inc.
Technical Data
Rough Wall Opening
11-1/2" (292mm) wide
53-5/8" (1362mm) high
3-3/4" (95mm) minimum
recessed depth
Finish Face of Wall
53-3/16''
1350mm
S
3-5/8''
92mm
S
9/16''
14mm
1-3/4''
45mm
Recommended Mounting Height Off Floor
69'' to 76'' 1755 to 1930mm
Recommended Mounting Height Off Floor
For Accessible Design
59-3/4'' 1520mm
11''
280mm
S S
55-1/8''
1400mm
34-1/4''
870mm
13''
330mm
S
S
Lock & Key
Door
Lock
Removable
Waste
Receptacle
Paper Towel
Dispenser
12-11/16''
322mm
48''
1220mm
Maximum
Mounting
Height
(Refer to ADA H/C)
Finish Face of Floor
MATERIALS:
Cabinet — 18-8, type-304, heavy-gauge stainless steel. All-welded construc tion.
Door — 18-8, type-304, 18-gauge (1.2mm) stainless steel with satin finish. 9/16" (14mm) 90° return for maximum rigidity. Secured to cabinet
with a concealed, full-length, stainless steel piano-hinge. Equipped with a stainless steel cable door-swing limiter and two tumbler locks keyed
like other Bobrick washroom accessories.
Paper Towel Dispenser — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Rounded towel tray has hemmed opening to
dispense paper towel without tearing. Capacity: 600 C-fold or 800 multifold paper towels.
Waste Container — Leak-proof rigid molded plastic. Removable for servicing. Capacity: 3.8-gal. (14.4-L).
Optional: Order Bobrick Model No. 3803-130 TowelMate
®
available as an optional accessory. TowelMate accessory allows for paper towels to
dispense one at time without bulging or sagging, or falling through the towel tray opening. The 90 degree return on the towel guide prevents
papers from falling forward and out when door is opened for servicing. TowelMate fits most other manufacturers' similar models.
OPERATION:
Paper towel dispenser is adjustable to dispense C-fold, multifold, or singlefold paper towels without use of additional adapters or towel
trays. To service waste receptacle, unlock door with key provided and remove waste container. Cable door-swing limiter prevents dam-
age to washroom accessories and walls.
INSTALLATION:
Provide framed rough wall opening 11-1/2'' wide x 53-5/8'' high (292 x 1362mm). Minimum recessed depth required from finish face
of wall is 3-3/4'' (95mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall.
Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide aluminum
channel or other filler to eliminate gap between flange and finish face of wall. Mount cabinet with shims between framing and cabinet at
all points indicated by an S, then secure unit with #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not furnished).
SPECIFICATION:
Recessed paper towel dispenser and waste receptacle shall be type-304 stainless steel with all-welded construction; exposed surfaces
shall be satin finish. Door shall be 18 gauge (1.2mm); have 9/16'' (14mm) 90° return edges; be secured to cabinet with a concealed,
full-length stainless steel piano-hinge; and equipped with a stainless steel cable door-swing limiter and two tumbler locks keyed like
other Bobrick washroom accessories. Paper towel dispenser shall dispensing 600 C-fold, 800 multifold, or 1100 singlefold paper towels.
Waste receptacle shall be furnished with a removable, leak-proof, rigid molded plastic waste-container with a capacity of 3.8-gal. (14.4-L)
.
Recessed Paper Towel Dispenser and Waste Receptacle shall be Model B-38034 of Bobrick Washroom Equipment,
Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited,
United Kingdom.
TrimLineSeries™
RECESSED
PAPER TOWEL DISPENSER
AND WASTE RECEPTACLE
B-38034