Specification Sheet

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. B-3803 r72711 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2011 by Bobrick Washroom Equipment, Inc.
Technical Data
1-7/8''
45mm
S
53-3/16''
1350mm
Recommended Mounting Height Off Floor
66'' to 73'' 1675 to 1855mm
Recommended Mounting Height Off Floor
For Accessible Design
59-3/4'' 1520mm
9/16''
14mm
S
5-5/8''
142mm
Finish Face of Wall
13''
330mm
S
11-1/16''
280mm
S
55-1/8''
1400mm
S
S
34-1/4''
870mm
Lock & Key
48''
1220mm
Maximum
Mounting
Height
(Refer to ADA H/C)
Door
Removable
Waste
Receptacle
Lock
Paper Towel
Dispenser
12-11/16''
322mm
Finish Face of Floor
MATERIALS:
Cabinet — 18-8, type-304, heavy-gauge stainless steel. All-welded construc tion.
Door — 18-8, type-304, 18-gauge (1.2mm) stainless steel. 9/16" (14mm) 90° return for maximum rigidity. Secured to cabinet with a concealed,
full-length, stainless steel piano-hinge. Equipped with a stainless steel cable door-swing limiter and two tumbler locks keyed like other Bobrick
washroom accessories.
Paper Towel Dispenser — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Rounded towel tray has hemmed opening to
dispense paper towel without tearing. Capacity: 600 C-fold, 800 multifold, or 1100 singlefold paper towels.
Waste Container — Leak-proof rigid molded plastic. Removable for servicing. Capacity: 6.3-gal. (24.0-L).
Optional: Order Bobrick Model No. 3803-130 TowelMate
®
available as an optional accessory. TowelMate accessory allows for paper towels to
dispense one at time without bulging or sagging, or falling through the towel tray opening. The 90 degree return on the towel guide prevents
papers from falling forward and out when door is opened for servicing.
OPERATION:
Paper towel dispenser is adjustable to dispense C-fold, multifold, or singlefold paper towels without use of additional adapters or towel
trays. To service waste receptacle, unlock door with key provided and remove waste container. Cable door-swing limiter prevents
damage to washroom accessories and walls.
INSTALLATION:
Provide framed rough wall opening 11-1/2'' wide x 53-5/8'' high (292 x 1362mm). Minimum recessed depth required from finish face
of wall is 5-3/4'' (146mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall.
Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide aluminum
channel or other filler to eliminate gap between flange and finish face of wall. Mount cabinet with shims between framing and cabinet at
all points indicated by an S, then secure with #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not furnished).
SPECIFICATION:
Recessed paper towel dispenser and waste receptacle shall be type-304 stainless steel with all-welded construction; exposed surfaces
shall have satin finish. Door shall be 18 gauge (1.2mm); have 9/16'' (14mm) 90° return edges; be secured to cabinet with a concealed,
full-length stainless steel piano-hinge; and equipped with a stainless steel cable door-swing limiter and two tumbler locks keyed like
other Bobrick washroom accessories. Paper towel dispenser shall be capable of dispensing 600 C-fold, 800 multifold, or 1100 singlefold
paper towels. Waste receptacle shall be furnished with a removable, leak-proof, rigid molded plastic waste-container with a capacity of
6.3-gal. (24.0-L).
Recessed Paper Towel Dispenser and Waste Receptacle shall be Model _________ (insert model number) of Bobrick
Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom
Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom
Equipment Limited, United Kingdom.
TrimLineSeries™
RECESSED
PAPER TOWEL DISPENSER
AND WASTE RECEPTACLE
B-3803
Rough Wall Opening
11-1/2" (292mm) wide
53-5/8" (1362mm) high
5-3/4" (146mm) minimum
recessed depth