Specification Sheet
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. 370639-200 r2/1/18 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2018 by Bobrick Washroom Equipment, Inc.
OPERATION:
After coin is inserted in dispensing mechanism of patron's choice, pushing button dispenses boxed sanitary
napkin or tampon tube. Mechanical operations; no batteries or electricity required. Coin slot of each dispensing
mechanism is identified by a graphic symbol. Capacity: 20 sanitary napkins and 30 tampons. Coin slots are
automatically blocked with a red indicator when supply is depleted. Coin Return Push-Button cancels the selection
and returns coin into product tray. Wrong coins (penny, nickel, dime) by-pass mechanisms and drop into product
tray. Vendor dispenses sanitary napkin packages measuring 2-7/8" x 3/4" x 4-1/8" to 3-1/8" x 1-1/8" x 4-3/8" (73
x 19 x 105mm to 80 x 29 x 111mm) and tampon tubes measuring 4-5/8" long x 9/16" diameter minimum to 5-1/8"
long x 3/4" diameter maximum (118 x 14 to 130 x 19mm).
INSTALLATION:
Mount unit on wall with four sheet-metal screws (not furnished) at points indicated by an S. For plaster or dry wall
construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal
screws (not furnished). For other wall construction, provide fiber plugs or expansion shields for use with sheet-
metal screws, or provide 1/8" (3mm) toggle bolts or expansion bolts. If unit projects above top of wainscot, provide
aluminum channel or other filler to eliminate gap between unit and finish face of wall.
SPECIFICATION:
Surface-Mounted napkin/tampon vendor shall combine two dispensing mechanisms in one cabinet to provide
sanitary napkins and tampons at user’s option. Mechanical operations; no batteries or electricity required.
Dispensing mechanisms shall be pre-set at factory for (insert one: Free, 25¢ or 50¢) operation, but shall be
convertible in the field to allow the change of coin denomination without removing unit from wall. Door shall be
furnished with graphics indicating specified coin denomination. Unit shall be Type-304 stainless steel with all-
welded construction; exposed surfaces shall have #4 satin finish. Stainless steel skirt shall have satin finish and
have a 90° returns on all edges. Door shall be 18 gauge (1.2mm); have flat door design with 90° return edges;
conceals flange; be secured to cabinet with a concealed, full-length stainless steel piano hinge; and equipped with
two tumbler locks keyed like other Bobrick washroom accessories. Vendor product selection and coin return
pushbutton-operation shall be certified ADA-ABA, ICC/ANSI A117.1 complaint by third party (certification
available on request) for operation with one hand with less than 5 pounds of force (22.2 N) without tight grasping,
pinching or twisting of the wrist. Push-Button coin return shall cancel selection and return coin into product tray.
Wrong coins (penny, nickel, dime) shall by-pass mechanisms and drop into product tray. Product tray shall be
impact-resistant PC-ABS plastic and provide easy access to dispensed product. Coin Box shall be equipped with a
tumbler lock that is keyed differently than door locks. Unit shall not carry brand-name advertising.
Surface-Mounted Napkin/Tampon Vendor shall be Model (insert model number) of Bobrick
Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California;
Bobrick Washroom Equipment Company, Scarborough Ontario; Bobrick Washroom Equipment Pty.
Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.