Specification Sheet

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 9/27/16
R/A, S/C
Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2016 by Bobrick Washroom Equipment, Inc.
continued . . .
Technical Data
16-1/16''
410mm
17-3/16''
435mm
9/16''
14mm
19-5/8''
500mm
30-5/8''
780mm
S
S
5''
125mm
6''
150mm
15-3/16''
385mm
11-5/16''
285mm
3-7/8''
100mm
1''
25mm
Ty p.
S
S
Toilet-Seat-Cover
Dispenser (2)
Sight-Barrier Panel
Toilet Tissue
Dispenser (4)
S
S
1/2'' to 3-7/8''
13 to 100mm
Fixed Flange
(Accessible
Compartment)
S
S
28-5/8''
725mm
Adjustable Flange
4-5/16''
110mm
Door
Grab Bars
(Not Furnished)
33''
840mm
to
Floor
Lock
& Key
Lock
Sanitary Napkin
Disposal Panel (2)
Removable
Waste Receptacle
Centerline of Toilet Tissue Dispenser
shall be 7'' to 9'' (180 to 230mm)
in Front of Toilet.
C
L
Outlet of Toilet Tissue
Roll shall be 18'' (460mm) ICC/ANSI
or 15'' (380mm) ADA Above Floor
C
L
3-5/8''
70mm
27-5/8''
700mm
Recommended Mounting Height Off Floor
For Universal/Accessible Design
43-1/4'' 1095mm
MATERIALS:
Cabinet — 18-8, Type-304, heavy-gauge stainless steel. All-welded construction. Exposed surfaces have satin fi nish. Equipped
with a plastic sight-barrier panel for the toilet seat-cover dispenser.
Flanges (2) — 18-8, Type-304, 22-gauge (0.8mm) stainless steel with satin fi nish. Drawn and beveled, one-piece, seamless
construc tion.
Door & Permanent Panel — 18-8, Type-304, 18-gauge (1.2mm) stainless steel with satin fi nish. One-piece, seamless
construction. Door is secured to cabinet with a full-length stainless steel piano-hinge and equipped with two tumbler locks
keyed like other Bobrick washroom accessories.
Toilet Tissue Dispensers (4) — .100" (2.5mm) thick ABS. Equipped with four theft-resistant, heavy-duty, one-piece, molded
ABS spindles.
Disposal Panels (2) — 18-8, Type-304, 22-gauge (0.8mm) stainless steel with hemmed edges; exposed surface has satin
fi nish. Secured to cabinet with spring-loaded, full-length stainless steel piano-hinge. Equipped with international graphic
symbols identifying napkin disposal.
Waste Receptacle — Leak-proof molded polyethylene. Removable for servicing. Capacity: 0.8-gal. (3.0-L).
OPERATION:
Toilet seat-cover dispenser is serviced from one side and holds 1000 single- or half-fold paper covers. Door unlocks with key
provided and swings open for fi lling. Spindles may be removed from cabinet when door is open; when door is closed, removal
requires a special key provided for the concealed locking mechanism in spindles. Receptacle is removable from one side of
unit for servicing. Unit holds four standard-core toilet tissue rolls up to 5-1/4" (135mm) diameter (1800 sheets), two for each
compartment.
Designer's Note: It is recommended that one full toilet tissue roll remain wrapped until the other roll has been depleted to avoid
wasting ends of both rolls.
ClassicSeries
©
PARTITION-MOUNTED
TOILET SEAT-COVER DISPENSER,
SANITARY NAPKIN DISPOSAL,
AND TOILET TISSUE DISPENSER
(Serves Two Toilet Compartments)
B-35715
Mounts in partition of accessible toilet compartment.
One side is fl ush against partition to allow clearance for horizontal grab bar across front of unit and
installation of 18" vertical grab bar (ICC A117.1-2009)
Rough Partition Cutout
15-1/2'' (395mm) wide; 28-7/8'' (735mm) high
1/2" to 3-7/8'' (13 to 98mm) partition thickness
See Designer's Notes under Installation for
Rough Partition Cutout Location Information