Specification Sheet

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 6/30/15
R/A, S/C
Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2015 by Bobrick Washroom Equipment, Inc.
continued . . .
Technical Data
16-1/16''
410mm
17-3/16''
435mm
9/16''
14mm
Lock
19-5/8''
500mm
30-5/8''
780mm
S
S
5''
125mm
6''
150mm
15-3/16''
385mm
11-5/16''
285mm
Lock & Key
Centerline of
Toilet Tissue Dispenser
shall be 7'' to 9'' (180 to 230mm)
in Front of Toilet
1''
25mm
Ty p.
3-7/8''
100mm
S
S
Toilet-Seat-Cover
Dispenser (2)
Sight-Barrier
Panel
Toilet Tissue
Dispenser (4)
S
S
1/2'' to 2''
13 to 51mm
Fixed Flange
S
S
Permanent
Panel
28-5/8''
725mm
Recommended Cutout Height Off Floor
59''
1500mm
Adjustable Flange
1-5/8''
40mm
4-5/16''
110mm
Door
Removable
Waste Receptacle
Sanitary Napkin
Disposal Panel (2)
C
L
Rough Partition Cutout
15-1/2'' (395mm) wide
28-7/8'' (735mm) high
1/2" to 2'' (13 to 51mm)
partition thickness
MATERIALS:
Cabinet — 18-8, type-304, heavy-gauge stainless steel. All-welded construction. Exposed surfaces have satin finish. Equipped
with a plastic sight-barrier panel for toilet-seat-cover dispenser.
Flanges (2) — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn and beveled, one-piece, seamless
construc tion.
Door & Permanent Panel — 18-8, type-304, 18-gauge (1.2mm) stainless steel with satin finish. One-piece, seamless
construction. Door is secured to cabinet with a full-length stainless steel piano-hinge and equipped with two tumbler locks
keyed like other Bobrick washroom accessories.
Toilet Tissue Dispensers (4) — .100" (2.5mm) thick ABS. Equipped with four theft-resistant, heavy-duty, one-piece, molded
ABS spindles.
Disposal Panels (2) — 18-8, type-304, 22-gauge (0.8mm) stainless steel with hemmed edges; exposed surface has satin
finish. Secured to cabinet with spring-loaded, full-length stainless steel piano-hinge. Equipped with international graphic
symbols identifying napkin disposal.
Waste Receptacle — Leak-proof molded polyethylene. Removable for servicing. Capacity: 0.8-gal. (3.0-L).
OPERATION:
Toilet-seat-cover dispenser is serviced from one side and holds 1000 single- or half-fold paper covers. Door unlocks with
key provided and swings open for filling. Spindles may be removed from cabinet only when door is open. Receptacle is
removable from one side of unit for servicing. Unit holds four standard-core toilet tissue rolls up to 5-1/4'' (135mm) diameter
(1800 sheets), two for each compartment.
Designer's Note: It is recommended that one full toilet tissue roll remain wrapped until the other roll has been depleted to avoid
wasting ends of both rolls. Disposable liners are available as an accessory for sanitary napkin disposal: order Bobrick Part No.
353-12.
ClassicSeries
®
PARTITION-MOuNTEd
SEAT-COvER dISPENSER,
SANITARy NAPkIN dISPOSAL,
ANd TOILET TISSuE dISPENSER
(SERvES TwO TOILET COMPARTMENTS)
B-357