Specification Sheet

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 6/30/15 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2015 by Bobrick Washroom Equipment, Inc.
Technical Data
Rough Wall Opening
15-7/8" (405mm) wide
11-7/16" (290mm) high
2-3/4" (70mm) minimum
recessed depth
17-9/16''
445mm
S
S
S
S
Door
Lock & Key
15-1/2''
395mm
8-1/2''
215mm
13-1/16''
330mm
S
2-1/2''
65mm
1-1/2''
40mm
11-1/16''
280mm
Recommended Mounting Height Off Floor
59'' 1500mm
Recommended Mounting Height Off Floor
For Accessible Design
48''
1220 mm
9/16''
14mm
Finish Face of Wall
MATERIALS:
Cabinet — 18-8, type-304, heavy-gauge stainless steel. All-welded construction.
Door — 18-8, type-304, 18-gauge (1.2mm) stainless steel with satin finish. 9/16" (14mm) 90° return for maximum rigidity.
Secured to cabinet with a concealed, full-length stainless steel piano-hinge. Equipped with a tumbler lock keyed like other
Bobrick washroom accessories.
OPERATION:
Dispenses single- or half-fold paper toilet seat covers. To fill dispenser, door unlocks with key provided. Capacity: 500 toilet seat
covers.
INSTALLATION:
Provide framed rough wall opening 15-7/8" wide x 11-7/16" high (405 x 290mm). Minimum recessed depth required from
finish face of wall is 2-3/4" (70mm). Allow clearance for construction features that may protrude into rough wall opening from
opposite wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits in wall. Mount cabinet with shims
between framing and cabinet at all points indicated by an S, then secure unit with four #8 x 1-1/4" (4.2 x 32mm) sheet-metal
screws (not furnished).
SPECIFICATION:
Recessed toilet-seat-cover dispenser shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have
satin finish. Door shall be 18 gauge (1.2mm); have 9/16" (14mm) 90° return edges; be secured to cabinet with a concealed,
full-length stainless steel piano-hinge; and equipped with a tumbler lock keyed like other Bobrick washroom accessories.
Dispenser shall have a minimum capacity of 500 paper toilet seat covers.
Recessed Toilet-Seat-Cover Dispenser shall be Model B-3013 of Bobrick Washroom Equipment, Inc., Clifton Park,
New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough,
Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United
Kingdom.
RECESSED
TOILET-SEAT-COVER
DISPENSER
B-3013