Installation Sheet

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 3/1/21 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2021 by Bobrick Washroom Equipment, Inc.
Technical Data
17-9/16''
445mm
S
S
S
S
Door
Flush Lock
& Key
15-1/2''
395mm
9-3/4''
248mm
13-1/16''
330mm
S
2-3/8''
60mm
2''
51mm
11-1/16''
280mm
5-15/16''
150mm
2-1/2''
65mm
9/16''
14mm
Finish Face of Wall
40''
Max
to Finsh
Face of Floor
Recommended Mounting Height Off Floor for CBC
45-7/8" (1166mm)
Recommended Mounting Height Off Floor for ADA
41-7/8" (1064mm)
MATERIALS:
Cabinet — 18-8, Type-304, heavy-gauge stainless steel. All-welded construction.
Door — 18-8, Type-304, 18-gauge (1.2mm) stainless steel with satin finish. 9/16" (14mm) 90° return for maximum rigidity.
Secured to cabinet with a concealed, full-length stainless steel piano-hinge. Equipped with a tumbler lock keyed like other
Bobrick washroom accessories. Tumbler lock flush with the door - no protrusion.
OPERATION:
Dispenses single- or half-fold paper toilet seat covers. To fill dispenser, door unlocks with key provided. Capacity: 500 toilet seat covers.
INSTALLATION:
Provide framed rough wall opening 15-7/8" wide x 11-7/16" high (405 x 290mm). Minimum recessed depth required from
finish face of wall is 2-3/4" (70mm). Allow clearance for construction features that may protrude into rough wall opening from
opposite wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits in wall. Mount cabinet with shims
between framing and cabinet at all points indicated by an S, then secure unit with four #8 x 1-1/4" (4.2 x 32mm) sheet-metal
screws (not furnished).
SPECIFICATION:
Recessed toilet-seat-cover dispenser shall be Type-304 stainless steel with all-welded construction; exposed surfaces shall have
satin finish. Door shall be 18 gauge (1.2mm); have 9/16" (14mm) 90° return edges; be secured to cabinet with a concealed,
full-length stainless steel piano-hinge. Equipped with a tumbler lock keyed like other Bobrick washroom accessories. Tumbler
lock flush with the door - no protrusion. Dispenser shall have a minimum capacity of 500 paper toilet seat covers.
Recessed Toilet-Seat-Cover Dispenser shall be Model B-3013 of Bobrick Washroom Equipment, Inc., Clifton
Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment
Limited, United Kingdom.
RECESSED
TOILET-SEAT-COVER
DISPENSER
B-3013
Rough Wall Opening
15-7/8" (405mm) wide
11-7/16" (290mm) high
2-3/4" (70mm) minimum recessed depth