Installation Sheet

continued . . .
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 8/3/17 S/B, R/A Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2017 by Bobrick Washroom Equipment, Inc.
Technical Data
Finish Face of Wall
5-5/16''
135mm
Lock & Key
12-1/4''
310mm
Door
S
S
7-9/16''
190mm
Recommended Mounting Height Off Floor
30''
760mm
Cabinet
1-1/8''
30mm
20-13/16''
525mm
5-5/8''
145mm
9-9/16''
245mm
5/32''
4mm
Typ.
S
S
S
S
C
L
Mount within 8'' (205mm)
in Front of Toilet Seat
Viewing Slot
Lever & Sliding Access Panel
11-3/8''
290mm
SURFACE-MOUNTED
TWIN JUMBO-ROLL
TOILET TISSUE DISPENSER
MATERIAL:
Cabinet — 18-8, Type-304, 20-gauge (1.0mm) stainless steel with satin-finish. Equipped with a tumbler lock keyed like other
Bobrick washroom accessories.
Door — 18-8, Type-304, 18-gauge (1.2mm) stainless steel with satin-finish. Drawn, one-piece, seamless construction. Wide
viewing slot reveals toilet tissue supply inside cabinet.
Dispensing Mechanism — High-impact ABS.
B-2892
Note: Dispenser is ICC A117.1 - 2009 Standard for
Accessibility compliant. Unit can be located below grab bar,
in area 24" minimum to 42" maximum from rear wall, with
outlet 18" minimum above floor.