Manualshelf

Specification Sheet

ManualsBrandsBobrick ManualsMirrorsBobrick 18" x 36" Channel Framed Mirror and Shelf Combo
12
continued . . .
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 06/28/17
R/B
Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2017 by Bobrick Washroom Equipment, Inc.
Technical Data
Designer’s Notes:
1. Special-order sizes available on request.
2. Maximum size mirror available, 60'' x 48'' (152 x 122cm) or 48'' x 60'' (122 x 152cm); minimum size, 12" x 12"
(30 x 30cm).
3. All Bobrick framed mirror/shelf models are manufactured to overall width and height dimensions of mirror, not
including shelf. EXAMPLE: B-166 2436'' (61 x 94cm) mirror will be furnished 24'' x 37-1/4'' (61 x 94cm) outside-of-
frame to outside-of-frame including shelf.
4. To specify special sizes use Series Number followed by width x height in inches. EXAMPLE: B-166 2024 20"x 24"
(51 x. 61cm).
5. Bobrick framed mirror/shelf models are manufactured to a tolerance
± 1/8'' (3.2mm).
6. For sufficient space to lift mirror onto wall hanger(s), provide 1" (25.4mm) minimum clearance above top of
mirror frame.
7. Provide 1'' (25mm) minimum clearance at bottom of mirror for unlocking mirror from wall and 1/2''
(12.7mm) minimum clearance on each side.
Figure: 1
MIRROR WITH
STAINLESS STEEL
CHANNEL FRAME
AND SHELF
B-166
SERIES
Snap Locking Design
(Rear View)
Lock Tab Design
(Rear View)
Figure: 2
Note: Mirrors greater than 30" in width will have multiple
hanger brackets with a typical 8" off each edge.
Slide flat-blade screwdriver
or Key between Mirror and
Wall. Depress Tab on back
Panel and remove Mirror.
Contact factory for key.
Lock Tab
4-5/8"
117mm
3-1/8"
79mm
Wall
Bracket
Lock
Tab
Mirror
Key
Half
Mirror Width
3/4''
19mm
Frame
Mirror
4''
102mm
1-5/16''
33mm
S
S
1/2''
13mm
Finish Face of Wall
1/2''
13mm
5-9/16''
141mm
3/8''
19mm
2-1/2''
65mm
S
2-9/16''
65mm
S
4'' or 5" Typ.
100 or 125mm
S
Side View
Back Plate/Wall Hanger
Frame
Mirror
Finish Face of Wall
STANDARD B-166 SERIES MIRRORS
MODEL
NO.
OVERALL SIZE
W H
B-166 1824 18'' (46cm) 25-1/4'' (64cm)
B-166 1830 18'' (46cm) 31-1/4'' (79cm)
B-166 1836 18'' (46cm) 37-1/4'' (94cm)
B-166 2436 24'' (61cm) 37-1/4'' (94cm)
All Other Size Mirrors
Width
Hanger Pockets
Up to 30'' (76cm) 1
Over 30" up to 72" (76 to 183cm) 2

Summary of content (2 pages)