Manualshelf

Specification Sheet

ManualsBrandsBobrick ManualsMirrorsBobrick B-165 48 Inch x 24 Inch Rectangular Stainless Steel Channel Framed Mirror
12
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 08/17/17
R/B
Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2017 by Bobrick Washroom Equipment, Inc.
Technical Data
continued . . .
MIRROR WITH
STAINLESS STEEL
CHANNEL FRAME
Designer's Notes:
1. Special-order sizes available on request.
2. Maximum size mirror available, 96" x 72'' (244 x 183cm); minimum size, 12" x 12" (30 x 30cm).
3. All Bobrick framed mirrors are manufactured to overall width and height dimensions. EXAMPLE: A 24" x 36''
(61 x 91cm) mirror will be furnished 24'' x 36'' (61 x 91cm) outside-of-frame to outside-of-frame.
4. To specify special sizes use Series Number followed by width x height in inches. EXAMPLE: B-165 2024 20" x 24"
(51 x. 61cm)
5. Bobrick framed mirrors are manufactured to a tolerance 1/8'' (3.2mm).
6. For sufficient space to lift mirror onto wall hanger(s), provide 1" (25mm) minimum clearance above top of
mirror frame.
7. Provide 1'' (25mm) minimum clearance at bottom of mirror for unlocking mirror from wall and 1/2''
(12.7mm) minimum clearance on each side.
B-165
SERIES
Note: Mirrors greater than 30" in width will have multiple
hanger brackets with a typical 8" off each edge.
Slide flat-blade screwdriver
or Key between Mirror and
Wall. Depress Tab on back
Panel and remove Mirror.
Contact factory for key.
Lock Tab
4-5/8"
117mm
3-1/8"
79mm
Wall
Bracket
Lock
Tab
Mirror
Key
Half
Mirror Width
Frame
Mirror
S
S
Finish Face of Wall
1/2''
13mm
3/4''
19mm
2-1/2''
65mm
S
2-9/16''
65mm
S
4'' or 5" Typ.
100 or 125mm
S
Side View
Back Plate/Wall Hanger
Frame
Mirror
Finish Face of Wall
B-165 1824 18'' (46cm) 24'' (61cm)
B-165 1830 18'' (46cm) 30'' (76cm)
B-165 1836 18'' (46cm) 36'' (91cm)
B-165 2430 24" (61cm) 30" (76cm)
B-165 2436 24'' (61cm) 36'' (91cm)
B-165 2448 24'' (61cm) 48'' (122cm)
B-165 2460 24'' (61cm) 60'' (152cm)
STANDARD B-165 SERIES MIRRORS
HW
MODEL
NO.
OVERALL SIZE
All Other Size Mirrors
Width
Hanger Pockets
Up to 30'' (76cm) 1
Over 30" up to 72" (76 to 183cm) 2
Over 72" up to 96" (183 to 274cm) 3
Figure: 1
Snap Locking Design
(Rear View)
Figure: 2
Lock Tab Design
(Rear View)
B-165 4836 48'' (122cm) 36'' (91cm)
STANDARD B-165 SERIES MIRRORS
HW
MODEL
NO.
OVERALL SIZE

Summary of content (2 pages)