Specification Sheet

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. B-887_ Series TD Issued 1/26/21
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2021 by Bobrick Washroom Equipment, Inc.
INSTALLATION:
Recommended through hole diameter to properly mount the spout/shank is 1 1/8” (32mm) to 1 1/4” (38mm). Refer to
installation instructions (form no. 8878-69) available on website and included with shipments of faucets for specific information
on how to install units.
Note: Before installation, turn off water supplies to existing faucet and remove faucet if replacing an existing device. Clean the
faucet basin and clear away debris. Flush all supply lines before connecting the faucet. Failure to do so may result in debris
clogging the inlets and/or internal control and mixing valve.
Plumbing Accessories Not Included: Temperature mixing valve, mixing tee, and water supply hose are not included in the
Designer Series Faucet.
SPECIFICATIONS:
Designer Series Counter-Mounted Faucet shall be an ADA compliant automatic, touch-free sensor faucet. Spout is made of
one-piece heavy-duty cast brass available in five different finishes. Unit shall offer adjustable operational modes for line purge
function, an adaptable sensor range, flow time, sensing mode, and metering mode. Unit shall use an Infrared Convergence
type proximity sensor to detect occupant hands and trigger the water flow for hygienic, hands-free operation. Faucet has an
automatic shut-off feature after 30 seconds if hand is not removed or object remains in sensor field to prevent water spills and
reduce excessive water use. Patented faucet includes an inline filter and is powered by 4 “AA” batteries (voltage range of 6
VDC Series) with an optional AC adapter. The Sensor activation range shall be self-calibrated, dependent upon sink depth and
finish. The Operating Water Pressure shall be in a range of 10-125 PSI (70-850kPA). The Operational Water Temperature shall
be in the range of 33°F to 140°F (1°C to 60°C). The Flow Rate shall be in the range of 0.5 GPM/ 1.9 LPM Vandal resistant
non-aerated. For LEED Compliance on flow rate, refer to your local codes.
Designer Series Counter-Mounted Faucet shall be _______________ (insert model number) of Bobrick Washroom
Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom
Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick
Washroom Equipment Limited, United Kingdom.