Specification

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 6/28/17 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2017 by Bobrick Washroom Equipment, Inc.
Diameter of Bottle
and Motor
Clearance Below
Counter
27-fl oz.
800ml
5''
125mm
11-5/8''
295mm
54-fl oz.
1600ml
5-1/2''
140mm
13-5/8''
345mm
INSTALLATION:
Unit is designed for installation in 1" (25mm) diameter hole in porcelain-enameled steel, cast iron or vitreous-china lavatories,
as well as in countertops adjacent to lavatories. Unit may be mounted in unused faucet hole or through special hole
requisitioned when lavatory is ordered from manufacturer (specify punching location). Shank accommodates maximum 2"
(50mm) mounting thickness. Clearance required for soap refill bottle and motor housing is 5" (125mm) for the 27-fl oz (800ml)
soap refill and 5-½" (140mm)diameter for 54-fl oz (1600ml) soap refill and 11-5/8" (295mm) minimum depth for height of 27 fl-
oz. of soap refill bottle and motor housing and 13-5/8" (345mm) minimum depth for height of 5-fl oz. (1600ml) soap refill bottle
and motor housing. Place 4 "D" Cell Batteries (included in Model B-826.18 only) into battery pack. An optional single 6V AC
adapter to replace the battery pack is available, order Part No. 826-20.
SPECIFICATION:
Automatic Lavatory-Mounted Soap Dispenser shall dispense controlled amount (0.8ml) of Lotion Hand Soap with Moisturizers,
Antibacterial Hand Soap or Lotion Hand Soap. Spout cover assembly to be Bright Polished chrome plated plastic. Meets
Barrier-Free accessibility standards. Unit shall have blinking LED indicators to show low soap level and low battery life. Shank
shall accommodate mounting thicknesses up to 2" (50mm). Translucent, shatter-resistant polyethylene soap refill (800ml soap
refill included in model B-826.18 only) shall have capacities of 27-fl oz (800ml) or 54-fl oz (1600ml).
Automatic Lavatory-Mounted Soap Dispenser shall be Model B-826 of Bobrick Washroom Equipment, Inc.,
Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment
Limited, United Kingdom.