Installation Guide

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 1/30/18 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2018 by Bobrick Washroom Equipment, Inc.
Waste Receptacle — 18-8 S, Type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Front and sides of bottom and all top
edges are hemmed for safe handling. Secured to cabinet with a tumbler lock keyed like other Bobrick washroom accessories.
Capacity: 12-gal. (45.5-L).
OPERATION:
Paper towel dispenser accommodates C-fold or multifold paper towels without adjustment or use of adapters. To adapt to
changing needs of washrooms, this unit is field convertible with the Universal, Touch-Free Roll Towel Dispenser or Universal,
Automatic Roll Towel Dispenser. To order convertible modules, reference part numbers below under Options.
To empty waste receptacle, unlock with key provided.
NOTE: To accommodate disposable trash liners, order LinerMate
®
, sold as an optional accessory item. LinerMate eliminates
unsightly trash liner overhang and facilitates installation and removal of disposable trash liners in the 12-gallon waste
receptacle.
Options:
• Universal Touch-Free Roll Towel Dispenser Module convertible in field: order Bobrick Part No. 3961-50.
• Automatic, Universal Roll Towel Dispenser Module convertible in field: order Bobrick Part No. 3974-250.
• LinerMate for 12-gal waste only: order Bobrick Part No. 3944-134.
• 18-gallon Waste Receptacle: order Bobrick Part No. 368-60, with reusable vinyl liner Part No. 368-16.
INSTALLATION:
Provide framed rough wall opening 16" wide x 54-3/4" high (406 x 1390mm). Minimum recessed depth required to finish face
of wall is 4" (102mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall.
Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide aluminum
channel or other filler to eliminate gap between flange and finish face of wall. Mount unit in wall opening with shims between
framing and cabinet at all points indicated by an S, then secure unit with #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not
furnished).
SPECIFICATION:
Recessed convertible paper towel dispenser and waste receptacle shall be Type-304 stainless steel with welded construction;
exposed surfaces shall have satin finish. Flange shall be drawn and beveled, one-piece, seamless construction. Door shall be
secured to cabinet with a full-length stainless steel piano-hinge and equipped with a semi-concealed tumbler lock keyed like
other Bobrick washroom accessories. Paper towel dispenser shall dispense 600 C-fold or 800 multifold paper towels. Removable
waste receptacle shall be secured to cabinet with a tumbler lock, have front and side edges of bottom and all top edges hemmed
for safe handling, and shall have a minimum capacity of 12-gal. (45.5-L).
Recessed Convertible Paper Towel Dispenser And Waste Receptacle shall be Model B-3944 of Bobrick Washroom
Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom
Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick
Washroom Equipment Limited, United Kingdom.