Specification Sheet
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 11/06/15 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2015 by Bobrick Washroom Equipment, Inc.
Technical Data
26-1/8''
665mm
10''
255mm
9-1/16''
230mm
12-3/16''
310mm
S
S
S
S
Door
Knob Latch
Paper Towel
Dispenser
Removable
Waste
Receptacle
Finish Face of Wall
3-15/16"
100mm
Recommended Mounting Height Off Floor
70'' 1780mm
2-3/8''
60mm
Ty p.
1''
25mm
Ty p.
28''
710mm
14''
355mm
1''
25mm
Ty p.
3/16''
5mm
S
S
31-1/32''
788mm
48''
1220mm
Max
Mounting Height
(Refer to ADA H/C)
Finish Face of Floor
Where Operable Parts Need to be 40" maximum (1015mm) Off the Floor
51-1/8" (1300mm)
Where Operable Parts Need to be 48" maximum (1220mm) Off the Floor
59-1/8" (1500mm)
MATERIALS:
Cabinet — 18-8, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have satin finish.
Flange — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn and beveled, one-piece, seamless construction.
Door — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Secured to cabinet with a full-length stainless steel piano-hinge.
Equipped with a knob latch.
Paper Towel Dispenser —
18-8, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Capacity: 350 C-fold or 475 multifold paper towels.
Optional: Order Bobrick Model No. 369-130 TowelMate
®
available as an optional accessory. TowelMate accessory allows for paper towels to
dispense one at time without bulging or sagging, or falling through the towel tray opening. The 90 degree return on the towel guide prevents
papers from falling forward and out when door is opened for servicing.
Waste Receptacle — 18-8, type-304, Heavy-gauge stainless steel with satin finish. Top edges are hemmed for safe handling. Retaining Hook.
Capacity: 2-gal. (7.6-L).
OPERATION:
Paper towel dispenser will dispense C-fold or multifold paper towels without adjustment. Rounded towel tray has hemmed opening to dispense
paper towels without tearing. Waste receptacle is retained in cabinet by a retaining hook feature and is removable for servicing.
INSTALLATION:
Provide framed rough wall opening 12-5/8" wide x 26-5/8" high (320 x 675mm). Minimum recessed depth required to finish face of wall is 4"
(102mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall. Coordinate with mechanical
engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide aluminum channel or other filler to eliminate gap
between flange and finish face of wall. Mount unit in wall opening with shims between framing and cabinet at all points indicated by an S, then
secure unit with sheet-metal screws furnished by manufacturer.
SPECIFICATION:
Recessed paper towel dispenser and waste receptacle shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have
satin finish. Flange shall be drawn and beveled, one-piece, seamless construction. Door shall be secured to cabinet with a full-length stainless
steel piano-hinge and equipped with a knob latch. Paper towel dispenser shall dispense 350 C-fold or 475 multifold paper towels without
adjustment or use of adapters. Removable stainless steel waste receptacle shall be retained in cabinet by a retaining hook feature, have top
edges hemmed for safe handling, and shall have a minimum capacity of 2-gal. (7.6-L).
Recessed Paper Towel Dispenser And Waste Receptacle shall be Model B-369 of Bobrick Washroom Equipment, Inc., Clifton
Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario;
Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.
ClassicSeries
®
RECESSED
PAPER TOWEL DISPENSER
AND WASTE RECEPTACLE
B-369
Rough Wall Opening
12-5/8" (320mm) wide
26-5/8" (675mm) high
4" (102mm) minimum
recessed depth