Instruction Manual Dog Training Collar
Packing List 1 X Remote Control 1 X Receiver 1 X Collar 1 X USB Cable 1 X Test Bulb 1 X Instruction Manual 2 Pair Contact Points(short / long) 2 Pair Conductive Silicone Covers(short / long) 1X Wrist Rope 1 2
Operation Steps: 1. Turn on the transmitter and receiver. 4. When the receiver does not work, it enters sleep mode after 2 minutes. Press any button on the remote control to reactivate it. 2. Press the the “power” button once again, the red light will light up and you will hear “Beep” 3. Press the ”Static Shock”button on the transmitter, and you will hear “Beep” again which means this product has been matched complete. Use the test bulb to test the shock. How to use two receivers at the same time: 1.
HOW TO USE Note: Please charge before using the product!(Limited charge current of Adapter need under 1A) 1.Charge the remote control: 1) Connect the charger cable to the charging port. 2) Plug the charger into a standard outlet. 3)The icon of battery will flash. 4) Charge the remote control for about one hour for the first charge or until the icon of battery stops flashing. 2.Charge the collar receiver: 1) Connect the charger cable to the charging port. 2) Plug the charger into a standard wall outlet.
How to Choose the appropriate Level for Dogs? The size of dog 15-30LBS 31-50LBS 51-80LBS >80LBS Beep level 1-3 1-3 1-3 1-3 Vibration level 1-5 5-9 9-12 12-16 Static shock level 1-5 3-7 5-9 7-16 Note: When using beep, vibration and static shock mode, please select the appropriate level according to the size of the dog.
About Products 1. When the transmitter does not work, the screen will be off in 1 minute. When the receiver does not work, it will be in sleeping mode in 2 minutes. 2. After the receiver enters the sleep mode, it can be waken up by pressing any key of the transmitter. 3. When the transmitter is locked, no response will be made by pressing any key. 4. There are 0-3 gears for sound, 0-16 gears for vibration, and 0-16 gears for electric shock (when the gear is 0, the receiver will not work).
WARNING Do not use this product for your aggressive dog, or if your dog is prone to aggressive behavior. Aggressive dogs may cause damage to the people or things around. If you are unsure whether this product is appropriate for your dog, please consult your veterinarian or certified trainer. Important Information 1. Place the collar on your dog at the beginning without starting to allow your dog to adapt. 2.
FAQ Q1: How old does my pet have to be before using Training Collar? A1: Your pet should be able to recognize basic obedience commands such as “Sit” or ”Stay” This product may be too large for pets under 10 pounds. Q2: Why does the training collar not work? A2: First make sure the transmitter is unlocked then adjust the appropriate level of Vibration, Static Shock and Beep based on your dog's characteristics such as character, type, age, weight, and so on.
Q7: What do I do if my pet's neck becomes red and irritated? A7: Discontinue to use the product for a few days. If the condition persists beyond 48 hours, consult your veterinarian for help. Once the skin recovers, check the skin condition of your pet frequently. Q8: How long is the lifetime of the lithium battery? A8: Our Lithium battery can charge 2000 times for Remote Controll and Receiver Collar.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.