Parts Manual

GENERAL INFORMATION

Before ordering parts, ALWAYS provide dealer with your product model

number and complete serial number information. Before ordering parts, verify

correct part numbers and/or serial numbers with your dealer. When using the

machine serial number, use the complete number.

Some serial number breaks are not available at time of printing.

These are listed as & Bel or & Abv or - (thru)

The number shown in the quantity column in this manual is the number of

parts needed for the illustration on the page. For some parts an “x” will be

shown in the quantity column. This “x” indicates that the quantity to be used

is “As Needed”.

When references LH (Left Hand) and RH (Right Hand) are used in this manual,

it is done from the operator’s seat in the forward operating position.

When “See Illustration….” appears in the remarks column, refer to the

contents page for the illustration title to find page number location.

Some of the illustrations and information found in this parts manual were

supplied to Bobcat by machine component companies.

For additional information on the Bobcat website visit www.bobcat.com

ABBREVIATIONS

SALES = Order from Gwinner Sales Department PM = Parts Manual

NSS = Not Serviced Separately S/L = Service Letter

NAP = Not Available as Parts W/ = With

BTI = Bobcat Technical Information Bulletin W/ O = Without

OM = Operation & Maintenance Manual ID = Inside Diameter

SM = Service Manual OD = Outside Diameter

AHC = Advanced Hand Controls “ = Inches

ACS = Advanced Control System ‘ = Feet

SJC = Selectable Joystick Controls MM = Millimeters

TRANSLATION KITS & DECAL KITS

AR = Argentina (Spanish) BR = Brazil (Portugese) JP = Japanese

(Translation Kit includes Safety Manual, Operators Manual & Decal Kit)

DISPOSITION

(Found in the Remarks Column)

[A] = Use Up

[B] = Use Up on Other Applications

[C] = File PDR Report with Bobcat Parts Sales

[D] = Part Number Error