User Manual

GENERAL INFORMATION
Before ordering parts, ALWAYS provide dealer with your product model
number and complete serial number information. Before ordering parts, verify
correct part numbers and/or serial numbers with your dealer. When using the
machine serial number, use the complete number.
The number shown in the quantity column in this manual is the number of
parts needed for the illustration on the page. For some parts an “x” will be
shown in the quantity column. This “x” indicates that the quantity to be used
is “As Needed”.
When references LH (Left Hand) and RH (Right Hand) are used in this manual,
it is done from the operator’s seat in the forward operating position.
When “See Illustration….” appears in the remarks column, refer to the
contents page for the illustration title to find page number location.
Some of the illustrations and information found in this parts manual were
supplied to Bobcat by machine component companies.
For additional information on the Bobcat website visit www.bobcat.com
ABBREVIATIONS
ACS = Advanced Control System MM = Millimeters
AHC = Advanced Hand Controls NAP = Not Available as Parts
A/C = Air Condition NSS =
Not Serviced Separately
ASSY = Assembly OD = Outside Diameter
AUX = Auxiliary OM =
Operation & Maint Manual
AWS = All Wheel Steer PM = Parts Manual
BPV = Bucket Positioning Valve PWM = Pulse Width Modulation
BTI =
Bobcat Technical Information Bulletin QT = Quart
CYL = Cylinder RH = Right Hand
DLX = Deluxe SALES = Sales Deparment
ELEC = Electrical SJC =
Selectable Joystick Controls
EMEA = Europe/Middle East/Africa SL = Service Letter
ENG = Engine SM = Service Manual
GAL = Gallon STD = Standard
HVAC =
Heating Ventilation & Air Condition TEMP = Temperature
HYD = Hydraulic TRANS = Transmission
ID = Inside Diameter W/A = Welded Assembly
IGN = Ignition W/ = With
INJ = Injection W/O = Without
LH = Left Hand “ = Inches
MFR = Main Frame ‘ = Feet