Service Manual

325/328 Excavator
51 Operation and Maintenance Manual
PARKING THE EXCAVATOR
Procedure
Stop the machine on level ground. Lower the work
equipment and the blade to the ground.
Figure OI-116
Move the speed control lever fully backwards
[Figure OI-116].
Run the engine at idle speed for about 5 minutes to allow
it to cool down.
Figure OI-117
Figure OI-118
Turn the key switch to STOP (Standard Panel) (Item 1)
[Figure OI-117] or press the STOP Button (Deluxe Panel)
(Item 2) [Figure OI-118].
Disconnect the seat belt. Remove the key from the switch
to prevent operation of machine by unauthorised
personnel. Raise the control console and dismount from
the machine.
P-16615
6808261
Stop
On
Start
1
P-16616
1