Service Manual

325/328 Excavator
39 Operation and Maintenance Manual
ATTACHMENTS (CONT’D)
Using The X-Change System (Cont’d)
Installing Bucket Or Attachment (X-Change System)
(Cont’d)
Figure OI-87
Lower the boom until the hooks (Item 1) of the bucket
disengage the pins (Item 2) of the X-Change and the plate
(Item 3) [Figure OI-87] engages in the bucket
crossmember.
WARNING
Keep all onlookers 6 m away from equipment when
operating. Contact with moving parts, a trench
collapse or flying objects can cause injury or death.
W-2119-0788
After the installation of the bucket, lift the boom
approximately 915 mm and fully extend and retract the
bucket cylinder to ensure the bucket is securely attached
to the X-Change.
P19396
3
2
1