Service Manual

325/328 Excavator

Operation and Maintenance Manual 38

ATTACHMENTS (CONT’D)

Using The X-Change System (Cont’d)

Installing Bucket Or Attachment (X-Change System)

WARNING

Never use attachments or buckets which are not

approved by Bobcat Company. Buckets and

attachments for safe loads of specified densities are

approved for each model. Unapproved attachments

can cause injury or death.

W-2052-0500

Figure OI-84

Fully retract the bucket cylinder to release the latch on the

X-Change [Figure OI-84].

Move the arm towards the bucket.

Figure OI-85

Raise the boom until the pins (Item 1) engage the hooks

(Item 2) [Figure OI-85] on the bucket.

Figure OI-86

Lift the boom and extend the bucket cylinder until the

bucket is in the position shown [Figure OI-86].

P19394

P19395

P19397