Service Manual

325/328 Excavator
37 Operation and Maintenance Manual
ATTACHMENTS (CONT’D)
Using The X-Change System (Cont’d)
Removing Bucket Or Attachment (Bolt On X-Change)
(Cont’d)
Figure OI-83
Fully retract the bucket cylinder and lower the boom and
arm until the bucket is on the ground, and the X-Change
pins (Item 1) are disengaged from the hooks (Item 2)
[Figure OI-83].
Move the arm towards the Excavator until the X-Change
pins are clear of the bucket.
P-49836
2
1