Service Manual

325/328 Excavator
105 Operation and Maintenance Manual
Instrumentation
Fluid Capacities
Fluid Specifications
• Hour meter
• Job clock
• Tachometer
• Fuel gauge
• Low fuel indicator
• Engine temperature gauge
• Air intake heater indicator
• Console indicator
• Auxiliary mode indicator
• Two-speed range indicator
• Engine/hydraulic service warning indicator
Cooling system 5.2 l
Engine lubrication plus oil filter 5.4 l
Fuel reservoir 53.3 l
Hydraulic reservoir 18.2 l
Hydraulic system with bucket and dipper
cylinder retracted, bucket on the ground, and
blade down
36.0 l
Travel motor (each) 0.5 l
Engine coolant Polypropylene glycol/water mix (53% – 47%) with freeze protection to -37°C
Engine oil Oil must meet API Service Classification of CD, CE, CF4, CG4, or better.
Recommended SAE viscosity number for anticipated temperature range.
* Can by used only when available with appropriate diesel rating.
For synthetic oil use the recommendation from the oil manufacturer.
Hydraulic fluid Bobcat Fluid (P/N 6563328)