Service Manual

ManualsBrandsBobcat ManualsOtherBobcat Excavator 325-328 Service Manual

111

112

113

114

115

116

117

118

119

120

325/328 Excavator

95 Operation and Maintenance Manual

DELUXE INSTRUMENT PANEL SETUP (CONT’D)

Password Lockout Feature

This allows the operator to unlock the password feature

so that a password does not need to be used every time

you start the engine.

Perform Password Entry. (See Password Entry (For

Starting and Operating the Machine) on Page 94.). The

password entry can be performed with the engine off or

with the engine running.

Figure SA-2

Press the Lock/Unlock button (Item 1) [Figure SA-2]. The

LCD will continuously alternate from UnLoc to CodE for 1

second periods.

Perform Password Entry again.

UnLoc will appear in the LCD (Item 5), the Unlocked Icon

(Item 2) will appear in the Icon Display Area (Item 3)

[Figure SA-2] and there will be two short beeps.

To start an Unlocked system, press the ENTER CODE

button and press the START button.

When you stop the engine with the system unlocked, you

will hear one long beep every 3 seconds for 15 seconds.

To lock the system again, press the Lock/Unlock button

(Item 1) [Figure SA-2] and enter the password during the

15 second period.

Job Clock

The JOB CLOCK can be set to record accumulated hours

for a particular job.

Press and release the HOURS/JOB/RPM button (Item 4)

until JOB light is ON at the top, centre of the LCD (Item 5)

[Figure SA-2].

While the JOB light is ON, press and hold the HOURS/

JOB/RPM button (Item 4) [Figure SA-2] until the LCD

returns to zero.

This process will clear the accumulated hours and will

begin recording JOB CLOCK time again. (This does not

affect the HOURMETER which continues to record the

total

operating hours of the Excavator.)

Press the HOURS/JOB/RPM button again or press the

START button to return the LCD to HOURMETER

function.

RPM

The LCD (Item 5) [Figure SA-2] can be set to display

engine RPM.

With the engine running, press and release the HOURS/

JOB/RPM button (Item 4) until RPM light is ON at the top,

centre of the LCD (Item 5) [Figure SA-2].

Engine RPM is now displayed in the LCD.

Press the HOURS/JOB/RPM button (Item 4)

[Figure SA-2] again the return to HOURMETER function.

B-15819