Service manual

BUCKET POSITION VALVE (S/N 5102) & (S/N 5103)

Removal And Installation

NOTE: The bucket position valve is optional for the

(S/N 5101) loader.

Remove all the tubelines connected to the valve [A].

Remove the two mounting bolts and remove the valve

[B].

Installation: Tighten the mounting bolts to 15–16 ft.–lbs.

(20–22 Nm) torque.

Always clean up spilled fuel or oil. Keep heat,

flames, sparks or lighted tobacco away from

fuel and oil. Failure to use care around

combustibles can cause explosion or fire

which can result in injury or death.

W–2103–1285

Never work on a machine with the lift arms up

unless the lift arms are secured by an approved

lift arm support device. Failure to use an

approved lift arm support device can allow the

lift arms or attachment to fall and cause injury

or death.

W–2059–0598

CD–10960

–2–40–

853, 853H BICS Loader

Service Manual

CD–10961